What is a PLA/PLA Sheet ?
Polylactic acid, or polylactide (PLA) is a thermoplastic polyester. You can read about it here from wiki: https://en.wikipedia.org/wiki/Polylactic_acid
Where PET PLA Sheet Products are used?
It is widely used for the production of the mulch film that is blended PLA called like “Bioflex”.Biodegradable cups, PLA tea bags, PET sheets, PLA sheets.
As a producer of the PLA PET sheet extrusion machine, Benk Machinery Co LTD, is increasing its research and development activities towards adopting new technology for the PET PLA sheet production machinery.
PET PLA sheet production line by Benk Machinery Co LTD can produce PET sheet products with thickness from 0.08 mm to 3 mm and the width can be adjusted from 650 mm up to 2000 mm as a required standard.
Benk Machinery Co LTD’s PLA PET plastic making machine can meet the specialized requirements of various clients in the production of all the above-mentioned products in terms of thermoformability, transparency, and stiffness.
Benk Machinery Co LTD provides wide options for efficient adjusting of PET PLA sheet manufacturing process. It includes extrusion concepts that may vary, winding systems, and co-extrusion and lamination.
We keep a reasonable balance in approved technologies and technical innovation. Thus, PLA PET sheet manufacturing line’s high-level efficiency is a high output, efficient energy consumption, easy operability and excellent service.
Material drying –>Material dosing –>Extruder –> Filtration Systems –> Flat die –>Roll stack–>Gauging system–>Unwinder for thermo lamination –> Accumulator –>Edge trim cutting/removing –>Winding unit–> Control system.
Concerning the price of the PET PLA producing machine, Benk Machinery Co LTD, can offer a different variation of the machine price, the first factor is capacity, and the next factor is speed and according to the client’s requirements, we will adjust the configurations for any special cases. So, the price of the PLA PET Sheet making machine can be obtained directly from us by contacting us at any time 24/7.
Model | KPM-75/8595 | KPM-75/8595 |
Raw material | APET, PETG, CPET | APET, PETG, CPET |
Products width | 650-2000mm | 650-1550mm |
Product thickness | 0.08-3mm | 0.13-2.5mm |
Extruder model | 75mm, 85mm, 85mm | 120mm, 90mm, 65mm |
Max. extrusion output | 550-1200kg/h | 450-600kg/h |
Model | Product width | Product thickness | Extrusion output |
KPM120/36 | 1000-3000 mm | 0.02-2.0 mm | 200-300 kg/h |
KPM120+KPM75 | 1000-3000 mm | 0.02-2.0 mm | 250-350 kg/h |
KPM130/36 | 1000-3000 mm | 0.02-2.0 mm | 300-400 kg/h |
KPM150/36 | 1000-3000 mm | 0.02-2.0 mm | 400-500 kg/h |
What is included in the PET PLA sheet extrusion line:
PET PLA Sheets making machine is actually a series of main machines with optional auxiliary machines. (Pls refer to the table below.) Therefore, we also call it the PET PLA Sheets manufacturing line.
Configurations Table:
No. | Machine Name | Quantity |
1 | KPM120/33 Single screw extruder | 1 set |
2 | Hydraulic screen changer (double column type) | 1 set |
3 | Melt pump | 1 set |
4 | Melt runner | 1 set |
5 | Mould | 1 set |
6 | Three-roll calender | 1 set |
7 | Roller temperature control system | 1 set |
8 | Cooling bracket | 1 set |
9 | Edge trimming device | 1 set |
10 | Waste edge winder | 1 set |
11 | Edge crusher (including air conveyed aggregate) | 1 set |
12 | Haul-off device | 1 set |
13 | Static eliminator | 1 set |
14 | Double station winder | 1 set |
15 | Full electrical control system | 1 set |
16 | Crystalline dehumidification and drying system | 1 set |
Optional Auxiliary machines |
||
1 | Air compressor | 1 set |
2 | Chiller | 1 set |
Please refer to our contacts for more information. We are here to help you 24/7.
PET MAIN TECHNICAL PARAMETERS
Model | KPM-75/8595 | KPM-75/8595 |
Raw material | APET, PETG, CPET | APET, PETG, CPET |
Products width | 650-2000mm | 650-1550mm |
Product thickness | 0.08-3mm | 0.13-2.5mm |
Extruder model | 75mm, 85mm, 85mm | 120mm, 90mm, 65mm |
Max. extrusion output | 550-1200kg/h | 450-600kg/h |
PLA MAIN TECHNICAL PARAMETERS
Model | Product width | Product thickness | Extrusion output |
KPM120/36 | 1000-3000 mm | 0.02-2.0 mm | 200-300 kg/h |
KPM120+KPM75 | 1000-3000 mm | 0.02-2.0 mm | 250-350 kg/h |
KPM130/36 | 1000-3000 mm | 0.02-2.0 mm | 300-400 kg/h |
KPM150/36 | 1000-3000 mm | 0.02-2.0 mm | 400-500 kg/h |