TYPE:

NAME:PET PLA SHEET PRODUCTION LINE

PET/PLA SHEET MANUFACTURING LINE

Polylactic acid, or polylactide (PLA) is a thermoplastic polyester. You can read about it here from wiki: https://en.wikipedia.org/wiki/Polylactic_acid

PET PLA Sheet Products

 

It is widely used for the production of the mulch film that is blended PLA called like “Bioflex”.

mulch film PLA sheet

Biodegradable cups

PLA cup

 

PLA tea bags

PLA tea bags

PET SHEETPLA PET Sheet

As a producer of the PLA PET production technology, Benk Machinery Co LTD, is increasing its research and development activities towards adopting new technology for the PET PLA sheet production machinery.

PET PLA sheet production line by Benk Machinery Co LTD can produce PET sheet products with thickness from 0.08mm to 3mm and the width can be adjusted from 650mm up to 2000mm as a required standard.

Benk Machinery Co LTD’s PLA PET plastic making machine can meet the specialized requirements of various clients in the production of all the above-mentioned products in terms of thermoformability, transparency and stiffness.

Benk Machinery Co LTD provides wide options for efficient adjusting of PET PLA sheet manufacturing process. It includes extrusion concept that may vary, winding systems and co-extrusion and lamination.

We keep a reasonable balance in approved technologies and technical innovation. Thus, PLA PET sheet manufacturing line’s high-level efficiency is a high output, efficient energy consumption, easy operability and excellent service.

PLA PET Sheet Production Line Flowchart

 Pet sheet extrusion machine

 

PET PLA Sheet Production Process

Material drying –>Material dosing –>Exruder –> Filtration Systems –> Flat die –>Roll stack–>Gauging system–>Unwinder for thermo lamination –> Accumulator –>Edge trim cutting/removing –>Winding unit–> Control system.

 

PET PLA Sheet Production Line Price

Concerning the price of the PET PLA producing machine, Benk Machinery Co LTD, can offer a different variation of the machine price, the first factor is capacity, and the next factor is speed and according to the client’s requirements, we will adjust the configurations for any special cases. So, the price of the PLA PET Sheet making machine can be obtained directly from us by contacting us at any time 24/7.

PET MAIN TECHNICAL PARAMETERS

Model KPM-75/8595 KPM-75/8595
Raw material APET, PETG, CPET APET, PETG, CPET
Products width 650-2000mm 650-1550mm
Product thickness 0.08-3mm 0.13-2.5mm
Extruder model 75mm, 85mm, 85mm 120mm, 90mm, 65mm
Max. extrusion output 550-1200kg/h 450-600kg/h

PET/PLA SHEET EXTRUSION PRODUCTION LINE

PLA MAIN TECHNICAL PARAMETERS

Model Product width Product thickness Extrusion output
KPM120/36 1000-3000mm 0.02-2.0mm 200-300kg/h
KPM120+KPM75 1000-3000mm 0.02-2.0mm 250-350kg/h
KPM130/36 1000-3000mm 0.02-2.0mm 300-400kg/h
KPM150/36 1000-3000mm 0.02-2.0mm 400-500kg/h

 

 

What are the configurations of PET PLA sheets making machine:

 PET PLA Sheets making machine is actually a series of main machines with optional auxiliary machines. (Pls refer to the table below.) Therefore, we also call it the PET PLA Sheets manufacturing line.

 Configurations Table:

No. Machine Name Quantity
1 KPM120/33 Single screw extruder 1 set
2 Hydraulic screen changer (double column type) 1 set
3 Melt pump 1 set
4 Melt runner 1 set
5 Mould 1 set
6 Three-roll calender 1 set
7 Roller temperature control system 1 set
8 Cooling bracket 1 set
9 Edge trimming device 1 set
10 Waste edge winder 1 set
11 Edge crusher (including air conveyed aggregate) 1 set
12 Haul-off device 1 set
13 Static eliminator 1 set
14 Double station winder 1 set
15 Full electrical control system 1 set
16 Crystalline dehumidification and drying system 1 set

Optional Auxiliary machines

1 Air compressor 1 set
2 Chiller 1 set

Please refer to our contacts for more information. We are here to help you 24/7. 

 

 

Do you have any questions to ask
please let us know.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Products