< /head>

Performance advantages of twin screw extruder

Time:2019-04-16

Performance advantages of twin screw extruder

The conical twin screw extruder has the characteristics of forced extrusion, high quality and wide adaptability.

Its service life is longer and its shear rate is small, so it can ensure the smooth operation of the equipment.

The mixing and plasticizing performance of twin-screw extruder is also very good.

Its powder can be directly shaped. It also has the ability of temperature self-control and vacuum exhaust device, which can ensure good use effect.

In the process of working, the heat generated by friction of equipment is still relatively small, the material is sheared more uniformly, the screw conveying capacity is also very large, the extrusion volume is relatively stable, the length of stay in the barrel is long, and the material can be mixed very evenly.

Twin-screw extruder is a cost-effective equipment, skilled in the performance of the machine, it can play an advantage in the process of work, the performance of the equipment is also very high.

When using twin-screw extruder, we must first understand the position of parts in each part of the twin-screw extruder, as well as the installation requirements on the instructions, so as to prepare for the next machine installation.

At the beginning of construction, the layout of motor cables should be determined according to the overall position of the machine, and the arrangement and installation of cables and wires should be completed first.

The twin-screw extruder should ensure the correct angle of the main engine when installing the main engine, because the angle of the main engine plays a decisive role in the normal operation of the machine, so the deviation of the angle of the main engine must be minimal, the position of the motor installation also needs to be strictly installed according to the position of the drawings, and the position deviation can not be too large.

The installation of the twin-screw extruder should be installed according to the requirements of the drawings. Can not be changed at will, only a detailed understanding can be better used.